How to Sew Patches on Jeans

Rips or holes in jeans shouldn't make them unwearable right away. In fact, you can even give old jeans a new lease of life if you cover the holes with brightly colored patches or fun patterns.

There, indeed, are ways to secure patches that do not require stitching. The easiest is to iron on a glued-on patch. Their quality holds up well too.

Nevertheless, the traditional sewing method is generally more effective in the long run. You can repair most holes without a hitch by using a patch and some stitching so long as you are familiar with the basic sewing techniques.

This article will show you how to sew patches on jeans the easiest way.

Items Needed to Sew Patches on Jeans

If you're going to learn how to sew on a patch on your jeans, prepare the following materials, which should be readily available.

Items Needed to Sew Patches on Jeans
  • Fabric
  • Matching thread
  • Needle
  • ScissorsIron
  • Sewing machine (optional)
  • Ironing board (optional)

How to Sew a Patch Over a Hole by Hand

If you abide by the following method of sewing patches on jeans, it will be easier. Even if you didn’t know how to sew patches before, you wouldn't have any problem.

How to Sew a Patch Over a Hole by Hand

Step 1: Choose a patch

Choose a patch that goes with your denim pants or jacket. You can use scraps of fabric that closely match your jeans instead of store-bought, sew on patches for jeans. By doing so, the patch won't be noticeable as much. Likewise, the material quality should match the existing one to minimize tension.

Step 2: Trim or cut off the frayed edges

This step is crucial because frayed edges make a hole appear smaller than it is for real. Also, it will prevent tangles during sewing.

Step 3: Measure the Jeans hole

Placing it on an ironing board or some flat surface will make your job easier. When sewing, ensure the patch is slightly bigger than the hole to allow enough room. There might be other weak spots around the torn area.

If possible, you should try to cover them as well. Also, your patch should have the same shape as the hole.

Step 4: Iron the patch

It’s a good idea to iron the patch over the hole, so it conforms nicely into shape. Turn off the steam on your iron and set the heat to medium. After that, apply even pressure to the patch as you drag the iron over it and then allow it to cool down.

Step 5: Position the patch

Pin the patch around the hole with your jeans laying it flat. There should be no gaps or bumps in between to ensure a neat finish. If needed, use fabric glue or tape.

Step 6: Start stitching

Now, stitch as many times as needed, considering the jeans' thickness. The more stitches you make, the less visible your patch will be.

Start stitching

Step 7: Finising the Patch

You can now finalize the patch by sewing a straight stitch around it to secure it. Cut off the excess thread, and you’re done.

How to Sew Patches on Jeans with Sewing Machine

Commercial concerns have patching sewing machines. But you can do the same with the machine you have in your home. Here’s how to sew a patch on jeans using a sewing machine.

How to Sew Patches on Jeans with Sewing Machine

Step 1: Choose the thread

It starts with choosing a thread color that suits you. Contrasting thread colors may add a touch of decorative flair. However, if you don't want the stitching to be visible, opt for a color that matches the patch's border.

Step 2: Postion the patch

Seams can make sewing over them a bit problematic. Simply place the patch in the appropriate location and pin it down.

Step 3: Stitch pattern

In the third step, you must choose the stitch pattern that should be straight, short, and uniform. After making all your selections, thread your machine and begin sewing.

How to Sew Patches on Jeans with Sewing Machine

Step 4: Stitching process

Be sure to backstitch right after making the first two or three stitches while sewing. Also, backstitch towards the end. While some people will tell you to turn the jeans inside out, you can choose whatever position is most comfortable for you.

Stitching Decorative Patches on Jeans

The sewing process for decorative patches onto jeans differs a little from covering up a hole. But it should be easier now that you know how to stitch a patch. You can follow these steps.

Stitching Decorative Patches on Jeans

Step 1: Choosing the embellishment

As every part of your jeans won't offer equal visibility, choosing a specific one for the decorative touch is crucial. It depends on the message you hope to convey where the embellishment should be placed. After identifying where you want it to be placed, make sure it is the right way up.

Step 2: Secure the patch onto your jeans

You can go with either pins or washable glue. Thus, the patch won't move around while you stitch it on the fabric, leading to a cleaner patchwork.

Step 3: Get the needle

Whether you opt for hand sewing or machine sewing, you will need a heavy-duty needle. This is because patches sewn on top of fabric tend to make it thicker.

Step 4: Start stitching

For your decorative patches, stitch them in a zigzag pattern. It ensures the thread passes over and through the patch creating thick and bold lines. If you are sewing with a machine, narrow the stitch down to the smallest setting.

Stitching Decorative Patches on Jean

Using a machine for zigzag stitching produces neat patchwork, in contrast to hand sewing, which is time-consuming and is not guaranteed to deliver the best results. Be sure to stitch all the way around the patch edge.


Your old ripped denim doesn’t have to go to waste. When you know how to sew patches on jeans, you'll end up renovating them. And if the jeans aren't torn, you'll be able to describe your fashion sense with an embellishment. You can go for an even more brilliant move by adding special touches like sequins or appliques to your fabric patches.


Click Here to Leave a Comment Below 0 comments

Leave a Reply: