How To Use A Speedy Stitcher Sewing Awl
Sewing or stitching is tricky. It requires precision and an eye for detail. If you have never stitched before, it will be even more perplexing for you. Well, that is precisely where speedy stitcher sewing awl comes in. But do you know how to use a speedy stitcher sewing awl?
Well, using a speedy sewing awl for a quick stitch might not be as complicated as hand sewing. While specific techniques like the leather sewing awl techniques might be complex, you could still get it through within some time.
Are you interested yet? Well, then you are in the right place. So scroll down and keep reading. You will receive all your answers soon.
How To Use A Speedy Stitcher Sewing Awl
Using a speedy stitcher is moderately easy. However, that is only when you have gotten slightly more adept at using this handheld device.
Well, don’t fret so soon because, in this section, we will be covering all the instructions that you need to follow to get your stitching done. Follow the below steps for a quick stitch sewing awl practice.
Step 1: Put the needle into the subject in concern, starting from the backside.
Step 2: When you draw out the thread from the front, take out an amount that will be able to stitch the entirety of the subject. In addition, take an excess of 3 inches of thread while you're at it.
Step 3: Hold the thread over the handle of the awl with your thumb. Then pull the needle back and puncture it through the second hole.
Step 4: Push the needle into the second hole as much as possible and then pull the thread slightly on the awl to instigate a loop. After that, make sure that the entirety of the thread passes through the loop.
Step 5: Hold the thread and stretch it to the maximum stress point. Then pull the needle out of the hole and form a lock stitch knot in the middle of the fabric layers. Make sure that it has been stretched to the maximum stress point as well.
Step 6: Release more threads from the needle to allow an ample amount of yarn for the following stitches. Continue with this process until the entire torn part of the subject has been covered by the stitch.
Step 7: After you have filled up the last hole, create another loop and pull the thread out.
Step 8: Cut the surplus thread except for the excess 3 inches. This 3 inches extra thread that you have taken back in the end step will be used to tie up the knot for the subject.
Step 9: Tie the excess thread into a knot on the subject's backside and trim any extra thread.
Step 10: When you are done with your stitching project, ensure that you have stored the speedy stitcher awl device. Remove the needle from the tip and store it in the right slot to store the awl. Finally, screw the chuck lock back into position.
Speedy Stitcher Tips & Tricks
Now that you are with the instructions, it is time that we give you some tips. You do not need to follow these tips right to the letter, unlike the instructions. Use them in accordance with your convenience. We have listed three of these more vital tips and tricks that will allow you to do wonders when working with stitches.
1. Use A Needle Of High Quality
It is essential that you use a needle of the ideal quality if you want to keep using it for a long time. The best modern needles are made from cast steel and feature reduced edges, triangular points, and long eyes for easy threading.
You might think that it is better to buy cheaper options of needles since all needles are the same. However, you are actually in the wrong. Cheap needles might be inexpensive, but they rust and break pretty easily. Furthermore, with these, you will be required to exert a lot of force than natural when pushing it through the fabric with these.
2. Pre-make Holes Into Thick Fabrics
Stitching on top of thick fabric can be challenging even if you use speedy stitcher awls. A technique to make it easier for you is to make holes on top of the fabric beforehand. The speedy stitcher awl can be used to achieve this.
All you need to do is puncture holes of appropriate sizes in the right place with the sharp part of your awl. It is through these parts that you will be weaving your needle. Do note that when piercing through the fabric for holes, make sure that these holes are uniform and evenly spaced.
3. Avoid Tying Too Many Knots
Knots are crucial in the essence that they are needed to lock your threads into the fabric. However, too many knots can also be a case of demerit. Over time, the knots might unloop by themselves and cause your stitches to unravel.
A tip when creating knots is to leave ample space all around the knot area. You can also leave an inch of space between the starting twine and sew over the tail of the intended knot area, trapping the knot under your thread in the fabric.
Is stitching hard? Well, it sure is! However, by now, you should have more than enough knowledge on how to use a speedy stitcher sewing awl when stitching.
Do note that different materials require different sweing awl techniques. For instance, a hand stitcher for leather will require you to use a stitching groover in order to mark your path beforehand. On the other hand, you can use pencils or pens to draw guidelines above canvas before stitching on top of them.
They are indeed complicated. However, don’t fret so soon. Give stitching enough time, and it will grow on you. Besides, that is exactly where speedy stitching awl excels in. Use a speedy sewing awl kit for a quick stitch.